|
Do it yourself
| |||
| ||||
How to remove the front bumper of the Mercedes Sprinter
Model: Mercedes Sprinter
Br907, Br910, MK 3
- Years:
2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
In this video, we will see how to remove the front bumper of a Mercedes Sprinter: we start by removing the four screws found on the top, then opening the hood: this way we will remove the grille with the symbol of the Manufacturer. With two screws on each side, we will also remove the front headlights. Behind them, we will find the three brackets holding the bottom part of the bumper, then a screw on each side attached directly to the frame. Once these screws are removed, we can remove the second part of the bumper. Now we will need to remove the part made of synthetic material, so we will have to lay down under the vehicle and remove the screws we see under the remaining part of the bumper. To remove the license plate holder, we will find a couple of screws under the grille as well. At this point, we can also pull towards us the bumper made of synthetic material, and the operation is complete.
Posted on 18 June 2025 by ScegliAuto
Related tutorials
Mercedes Sprinter
(1995-2006 /
MK 1, W901)
In this video tutorial, you will see the main steps to remove and replace the cooling radiator on the first generation Mercedes Sprinter. Before proc…
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
The instructions in this guide will show you how to adjust the front door of the Mercedes Sprinter. First, open the front door of the vehicle and sta…
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
Removing the radiator fan from a Mercedes Sprinter is a fairly simple operation. Start by opening the front bonnet, then remove any elements obstruct…
Other guides you may be interested in
|
How to Open the Bonnet of a Toyota C-HR
To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.049
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
