Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Sprinter
  6. : Disassembly of the cooling radiator on the Mercedes Sprinter MK1

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 1, W901 - Years 1995-2006
Part: Radiator
Operation: Disassembly of the cooling radiator on the Mercedes Sprinter MK1

In this video tutorial we will see the main steps to disassemble and replace the cooling radiator on the Mercedes Sprinter first series. Before proceeding with the disassembly of the radiator it is necessary to disassemble the front bumper, unscrewing all the fixing screws; after which we remove the coolant sleeve, letting it drain into a container. At this point we unscrew all the screws of the radiator brackets, disconnecting the liquid inlet container; now we remove all the radiator hoses, following the video to the end for complete disassembly!


Posted on 29 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos