Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cooling Radiator from a Mercedes CLA 180

Model: Mercedes CLA C117, X117 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Radiator

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and remove the engine cooling radiator from the Mercedes CLA 180. First, open the hood of the vehicle and start by removing the front bumper; to do this, unscrew all the fastening screws located at the top and on both sides of the front wheel wells.

At this point, unscrew the screws of the radiator brackets, disconnecting the hoses and pipes of the coolant to remove it; replace the radiator with the new original one, finally reassembling the front bumper.


Posted on 26 June 2026 by ScegliAuto


Related tutorials

How to Refill the Radiator Reservoir on Mercedes CLA
How to Refill the Radiator Reservoir on Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) How do you maintain your car? Let's see how to refill the coolant reservoir on a Mercedes CLA. Pull the plastic lever to unlock the hood, lift the ho…
Replacing the Low Beam Bulb on the Mercedes CLA
Replacing the Low Beam Bulb on the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) In this brief guide, learn how to remove and replace the xenon low beam bulb in the front headlight of the Mercedes CLA by following these simple ste…
Removing the Center Console of the Mercedes CLA
Removing the Center Console of the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) Here are the main instructions for removing and replacing the center console of the Mercedes CLA. First, get inside the vehicle and start prying on t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos