Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Low Beam Bulb on the Mercedes CLA

Model: Mercedes CLA C117, X117 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

In this brief guide, learn how to remove and replace the xenon low beam bulb in the front headlight of the Mercedes CLA by following these simple steps. First, move to the side of the vehicle and start by removing the plastic cover found on the front wheel arch to access the back of the headlight; then remove the xenon bulb along with the ballast by disconnecting the electrical connector.

At this point, replace the bulb with a new one of the correct type, and finally reassemble everything!


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb in the Mercedes CLA
How to replace the headlight bulb in the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) In this guide, we will go through the steps to remove and replace the low beam bulb in the front headlight of the Mercedes CLA. To access the low bea…
Replacing the Headlight Bulb on the Mercedes CLA
Replacing the Headlight Bulb on the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) Today, discover the steps to remove and replace the headlight bulb on the Mercedes CLA by following the instructions below. To remove and replace the…
Replacement of the front headlight bulb of the Mercedes CLA
Replacement of the front headlight bulb of the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) Below we will discover the instructions on how to disassemble and replace the headlight bulb of the Mercedes CLA. In order to access the headlight bu…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos