Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb in the Mercedes CLA

Model: Mercedes CLA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

Video tutorial

In this guide, we will go through the steps to remove and replace the low beam bulb in the front headlight of the Mercedes CLA. To access the low beam bulb, you need to remove the rectangular plastic cover located in the wheel well; then disconnect the electrical connector of the low beam bulb by unhooking it and removing it from the light assembly, as shown in the video.

At this point, install the new low beam bulb of the correct type and with the same base; check the operation of the light, adjusting the height of the headlights if necessary.


Posted on 10 October 2026 by ScegliAuto


Related tutorials

Replacement of the front headlight bulb of the Mercedes CLA
Replacement of the front headlight bulb of the Mercedes CLA
Mercedes CLA (2013-2019 / X117, C117) Below we will discover the instructions on how to disassemble and replace the headlight bulb of the Mercedes CLA. In order to access the headlight bu…
Replacement of the front headlight bulb of the Mercedes CLA
Replacement of the front headlight bulb of the Mercedes CLA
Mercedes CLA (2013-2019 / X117, C117) In this guide, we will see the process of disassembling and replacing the headlight bulb of the Mercedes CLA in simple steps. First, we need to turn …
Replacing the Headlight Bulb on the Mercedes CLA
Replacing the Headlight Bulb on the Mercedes CLA
Mercedes CLA (2013-2019 / X117, C117) Today, discover the steps to remove and replace the headlight bulb on the Mercedes CLA by following the instructions below. To remove and replace the…

Other guides you may be interested in

How to reset the Service light of the Fiat 500X?

To reset the Service light of the Fiat 500X, insert the ignition key into the ignition switch to turn on the instrument cluster. Once powered on, press the accelerator pedal three times in quick succession. After this operation, wait a few seconds for the Service light reset to complete. Once the reset procedure is finished, release the pedals and then turn off the instrument cluster by turning the key.

Watch the video!


by ScegliAuto

More videos