Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Center Console of the Mercedes CLA

Model: Mercedes CLA C117, X117 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Center console tunnel

See other generations:
Video tutorial

Here are the main instructions for removing and replacing the center console of the Mercedes CLA. First, get inside the vehicle and start prying on the side of the console to detach it. Then, disconnect the electrical connectors located underneath to fully remove it, as shown in the video.

Next, remove the console's glove compartment by gently detaching it from the center tunnel.

Again, disconnect all the connectors found underneath, following the video tutorial to the end!


Updated on 16 September 2026 by ScegliAuto


Related tutorials

Removing the Rear Headlight of a Mercedes CLA
Removing the Rear Headlight of a Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) Today, you will learn how to remove the rear headlight of a Mercedes CLA. First, open the trunk and lift the carpet lining. Then, use a socket wrench…
How to Set the Clock in a Mercedes CLA?
How to Set the Clock in a Mercedes CLA?
Mercedes CLA (2013-2019 / C117, X117) In this tutorial, you will see how to set the time in a Mercedes CLA, a very simple and quick operation to perform, for example, after daylight savin…
How to Remove the Radio from a Mercedes CLA
How to Remove the Radio from a Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) In this brief and simple guide, you will learn the steps to disassemble and replace the radio in a Mercedes CLA. First, get inside the vehicle and st…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos