Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Radio from a Mercedes CLA

Model: Mercedes CLA C117, X117 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

In this brief and simple guide, you will learn the steps to disassemble and replace the radio in a Mercedes CLA. First, get inside the vehicle and start by removing the side air vents located in the center of the dashboard; just pull them towards you, as shown in the video.

At this point, you will find screws securing the radio inside the two vent openings, which you will need to unscrew; then, pull out the radio, disconnecting all the electrical connectors found on the back.

Follow the reverse procedure for reassembly!


Updated on 6 August 2026 by ScegliAuto


Related tutorials

Mercedes CLA (2013-2019 / C117, X117) Follow these instructions to disassemble and replace the stock radio in the Mercedes CLA in simple steps. First, get inside the vehicle and start pul…
Mercedes CLA (2013-2019 / C117, X117) Follow the steps to remove and replace the factory radio in the Mercedes CLA and GLA. First, get inside the vehicle and start by removing the central…
Mercedes CLA (2013-2019 / C117, X117) Before you begin, open the hood of your Mercedes CLA. Start by removing the lower engine covers by unscrewing the fastening screws. Next, unscrew and…

How to Activate the Cruise Control on the Toyota Yaris?

To activate the cruise control on the Toyota Yaris, start the engine by turning the key in the ignition switch. Once the engine is running, press the accelerator pedal until you reach the desired speed. Then, press the button on the right side of the steering wheel to activate the cruise control. You can also adjust the cruising speed by lifting the switch to increase it and lowering the switch to decrease it.

Watch the video!


by ScegliAuto

More videos