Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly and replacement of the stock radio in the Mercedes CLA

Model: Mercedes CLA C117, X117 - Years 2013-2019
Part: Car stereo

Below we will see the instructions that will allow us to disassemble and replace the standard radio of the Mercedes CLA, in simple steps. First of all, we get on board the car and start pulling and removing the central air vents, then unscrewing the screws we find underneath; then we remove the radio from the central dashboard, disconnecting the electrical connectors found on the back, as shown in the video. At this point, we install the new radio with integrated multimedia system, following the video tutorial until the end for reassembly!

Posted on 24 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Mercedes CLA (2013-2019 / C117, X117) Follow the steps to remove and replace the factory radio in the Mercedes CLA and GLA. First, get inside the vehicle and start by removing the central…
Mercedes CLA (2013-2019 / C117, X117) In this brief and simple guide, you will learn the steps to disassemble and replace the radio in a Mercedes CLA. First, get inside the vehicle and st…
Mercedes CLA (2013-2019 / C117, X117) Let's briefly go over the steps and procedure for removing and replacing the battery in the Mercedes CLA 200d. First, open the hood of the vehicle an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos