Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Factory Radio in the Mercedes CLA - GLA

Model: Mercedes CLA C117, X117 - Years 2013-2019
Part: Car stereo

Follow the steps to remove and replace the factory radio in the Mercedes CLA and GLA. First, get inside the vehicle and start by removing the central display of the radio. Unscrew the screws located on the back and disconnect the electrical connector. Next, remove the two side air vents by unscrewing the screws inside to take off the stereo panel, as shown in the video. At this point, install the new radio or multimedia system, following the video tutorial to the end!

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly and replacement of the stock radio in the Mercedes CLA
Disassembly and replacement of the stock radio in the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) Below we will see the instructions that will allow us to disassemble and replace the standard radio of the Mercedes CLA, in simple steps. First of al…
How to Remove the Radio from a Mercedes CLA
How to Remove the Radio from a Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) In this brief and simple guide, you will learn the steps to disassemble and replace the radio in a Mercedes CLA. First, get inside the vehicle and st…
How do you reset the service light in the Mercedes CLA 180?
How do you reset the service light in the Mercedes CLA 180?
Mercedes CLA (2013-2019 / C117, X117) In the Mercedes CLA, exactly the w117 series, of which we have an example in the video available here, the service light reset does not necessarily r…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos