Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the cooling system of the Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Antifreeze coolant

In this video, we will see how to check the cooling system of the Mercedes Sprinter. The tank is located on the passenger side, inside the engine compartment. It is a semi-transparent plastic container that should be checked with the engine cold for an accurate reading. On the side of the tank, we will find the "min" and "max" marks, and it is on the latter mark that the level should be at when the engine is cold. If the level is below the minimum, a warning light on the instrument panel may have turned on. We then proceed to top up with liquid that should be the same color as the one inside the tank.

Posted on 9 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cooling Radiator on the Mercedes Sprinter MK1
Removing the Cooling Radiator on the Mercedes Sprinter MK1
Mercedes Sprinter (1995-2006 / MK 1, W901) In this video tutorial, you will see the main steps to remove and replace the cooling radiator on the first generation Mercedes Sprinter. Before proc…
Where Are the Fuses on the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) The fuses for the Mercedes Sprinter are located within two fuse boxes installed inside the vehicle: both are found within the cabin. The first box is…
What is the fuse diagram of the Mercedes Sprinter used for?
What is the fuse diagram of the Mercedes Sprinter used for?
Mercedes Sprinter (2006-2018 / MK 2, W906) Easy to imagine, the fuse diagram of a vehicle in general, not just the Mercedes Sprinter, has the precise task of helping us in troubleshooting, in …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos