Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Applying the Manufacturer's Emblem

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Manufacturer emblem

See other generations:
Video tutorial

To apply the manufacturer's emblem on the vehicle's bonnet, it is essential to correctly mark the position to ensure it is perfectly centred, and to thoroughly clean the surface for the adhesive on the back of the emblem to adhere properly. There is a rib in the centre of the bonnet that defines the exact centre; clean the surface thoroughly, apply masking tape aligning the edge of the tape with the rib, mark a point with a marker to align the base of the emblem, and apply it considering that the centre of the emblem is located between the letters E and N in the word BENZ.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Applying the Wheel Centre Cap Logo
Applying the Wheel Centre Cap Logo
Mercedes Sprinter (2006-2018 / MK 2, W906) To apply the badge to the centre of the plastic cap on the wheel rim, first clean the area where the badge will adhere, removing any dirt that could …
How to Remove the Manufacturer's Badge
How to Remove the Manufacturer's Badge
Mercedes Sprinter (2006-2018 / MK 2, W906) Every car leaves the manufacturer's warehouse with emblems that are usually attached to the bodywork with a strong adhesive that does not damage the …
Description of Turbocharger Operation
Mercedes Sprinter (1995-2006 / MK 1, W901) The application of the turbocharger to diesel engines has represented an innovative solution not only to improve performance but also to enhance effi…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos