Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the ABS Wheel Speed Sensor on a Mercedes Sprinter

Model: Mercedes Sprinter MK 1, W901 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Brake rotors

See other generations:
Video tutorial

Remove the brake disc and the ABS wheel speed sensor. Unscrew the wheel bolts with a socket wrench and (using an air drill) remove the wheel; begin by unscrewing the securing bolts of the ABS sensor (located above the brake disc).

Use a screwdriver to detach the clips holding the wiring. Remove the brake disc and wheel hub (as shown in the video), unscrew the sensor securing screw, and remove the entire piece.

Finally, connect the new ABS sensor, install the wheel speed sensor, and screw everything back onto the disc above the wheel hub. Refit the wheel to complete the replacement.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to know the fuse diagram of a Mercedes Benz Sprinter
How to know the fuse diagram of a Mercedes Benz Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) In this video we see the fuse diagram related to a Mercedes Benz Sprinter vehicle. The first board that is shown to us is related to the box located …
How to Reset the TPMS Light on a Mercedes Sprinter
How to Reset the TPMS Light on a Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) If the TPMS sensor on your Mercedes Sprinter has reading issues that cause the warning light to appear on the display, you need to perform a manual r…
Common problems with Mercedes Sprinter
Common problems with Mercedes Sprinter
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) This video perfectly illustrates one of the most common problems with Mercedes Sprinter diesel engines: the EGR valves get clogged with carbon and so…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos