Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to do when the tire pressure warning light comes on in a Mercedes

Model: Mercedes Mercedes Various
Part: Tire pressure warning light

In this video we see what to do if the tire pressure warning light comes on in a Mercedes. We enter the display to check which tire has low pressure. The second step is to stop at a gas station to inflate the tire that has lost pressure. The third step is to check the correct tire pressure on the driver's door thickness. In this case it is expressed in PSI but it could also be expressed in Bar or Kpa. Inflate the tire and now we need to communicate to the car what we have done. We go to "service", then to tires and confirm all values with "ok".

Posted on 12 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on a Mercedes
How to reset the TPMS light on a Mercedes
Mercedes Mercedes Various To reset the TPMS warning light, related to tire pressure, on a 2019 Mercedes vehicle, we need to press the menu button on the steering wheel. By pre…
How to reset the tire pressure sensor on the 2022 Mercedes Metris
How to reset the tire pressure sensor on the 2022 Mercedes Metris
Mercedes Mercedes Various In the following guide, we will discover together how to correctly perform the manual reset of the tire pressure warning light on the instrument pane…
How to reset the TPMS light on a Mercedes vehicle
How to reset the TPMS light on a Mercedes vehicle
Mercedes Mercedes Various To reset the tire pressure warning light on a new generation Mercedes vehicle, we first need to turn on the car's instrument panel and then press the…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos