Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear bumper of the Mercedes B-Class

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Rear bumper

Below are the main instructions for disassembling and replacing the rear bumper of the Mercedes Class B. First, lift the vehicle and start unscrewing and removing all the screws and clips located above and below the bumper; they can also be found on both sides of the rear wheel arches, as shown in the video. At this point, lever the sides of the bumper to detach and remove it, replacing it if necessary with a new one; reassemble and securely attach the rear bumper, applying the reverse procedure of disassembly!

Posted on 30 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. To remove the rear bumper of a Mercedes-Benz B-Class, raise the vehicle to work comfortably underneath. Ensure that the lifting system is secure; do.. …
Removing the Front Bumper of a Mercedes B
Removing the Front Bumper of a Mercedes B
Mercedes Classe B (2011-2019 / W246, MK 2) How to remove the front bumper of a Mercedes B? Start by lifting the front bonnet and removing the retaining rivets located at the top of the bumper.…
How do you remove the bumper of the Mercedes Class B w245?
How do you remove the bumper of the Mercedes Class B w245?
Mercedes Classe B (2005-2011 / W245, MK 1) .. to disassemble the front bumper of the Mercedes Class B w245. First, we need to remove the clips from the front wheel arches and reach the rear pins.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos