Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light bulb

See other generations:
Video tutorial

The following steps will show us how to dismantle and replace the bulbs of the rear headlight of the Mercedes E-Class. First, we open the rear trunk door and start removing the side carpet lining, removing the clip; then we unscrew the fixing screw of the rear light and disconnect the electrical connector of the lights, as shown in the video.

At this point, we remove the faulty bulbs of the headlight, replacing them with new ones; then we reassemble the rear light and check its operation, following the video tutorial to the end!


Posted on 27 December 2024 by ScegliAuto


Related tutorials

Replacing the Rear Headlight Bulbs on the Mercedes E-Class
Replacing the Rear Headlight Bulbs on the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. the rear headlight bulbs on the Mercedes E-Class. First, open the trunk and start by removing the rear cover to access the headlight bulbs. Then,.. …
How to Replace the Headlight Bulb on a Mercedes E-Class
How to Replace the Headlight Bulb on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. Replacing the headlight bulb on a Mercedes E-Class is a simple and quick task you can do yourself. To replace the bulb, remove the cover of the light.. …
How to replace the headlight bulb of the Mercedes E-Class
How to replace the headlight bulb of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. on the right front headlight of a Mercedes E-Class model W 211. To replace the bulb, we need to open the front hood and then disconnect the connector.. …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos