Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlight Bulbs on the Mercedes E-Class

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Tail light bulb

See other generations:
Video tutorial

Follow these steps to remove and replace the rear headlight bulbs on the Mercedes E-Class. First, open the trunk and start by removing the rear cover to access the headlight bulbs.

Then, disconnect the bulb connector and remove the small bulb that needs to be replaced, as shown in the video. You can now replace the brake light, reverse light, or turn signal (which have the same base); secure them properly in the headlight assembly and finally check their operation!


Updated on 7 October 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on a Mercedes E-Class
Replacing the Headlight Bulb on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replace the headlight bulb on a Mercedes E-Class. First, open the hood of your car and start by removing the plastic cover for the bulbs; on the.. …
How to replace the rear headlight bulb of the Mercedes E-Class
How to replace the rear headlight bulb of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. bulbs of the rear headlight of the Mercedes E-Class. First, we open the rear trunk door and start removing the side carpet lining, removing the clip;.. …
How to Replace the Battery in a Mercedes E-Class?
How to Replace the Battery in a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To replace the battery in a Mercedes E-Class, open the hood to access the components in the engine compartment. In the upper right section,.. …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos