Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

How to disassemble the rear door panel on a Mercedes E-Class? Let's see how to proceed in this video. Before starting the disassembly, disconnect the battery terminals located in the engine compartment.

Begin the disassembly: use a pry tool to remove the plastic cover under the door handle, then, using a screwdriver, remove the securing screws located underneath. Once all screws are removed, detach the plastic clips that secure the door.

Remove the door panel by hand, disconnect the power connectors, and the door release cable.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Mercedes E-Class Coupe
How to Remove the Door Panel of a Mercedes E-Class Coupe
Mercedes Classe E (2002-2009 / W211) .. To remove the door panel of a Mercedes E-Class Coupe, first disconnect the battery terminals. Start the disassembly: use a pry tool to remove.. …
How to Remove the Door Panel of the Mercedes E-Class
How to Remove the Door Panel of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. how to remove the door panel of a Mercedes E-Class model W 212. To remove the door panel, open the front door that needs disassembly. Using a flathead.. …
How to Remove the Rear Door Panel on a Mercedes E-Class?
How to Remove the Rear Door Panel on a Mercedes E-Class?
Mercedes Classe E (1995-2002 / W210) .. to remove the rear door panel on a Mercedes E-Class W210. For this simple and quick operation, you will need a Phillips screwdriver and a plastic trim.. …

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos