Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of a Mercedes C-Class

Model: Mercedes Classe C W206 - Years 2021-2026
Part: Car door

In this video, we will see how to disassemble the inner panel of the driver's side door of a Mercedes C-Class: under the inner handle, we find two screws that need to be removed, which are the ones that secure the panel to the outer door. Then we will need to pry around the panel, which is held by plastic clips that need to be carefully removed so as not to break: particular attention should be paid to the upper left corner, which will not detach, but needs to be slid outwards in order to remove it from its housing. Then we will need to disconnect all the electrical connectors inside, and finally we can remove the panel.

Posted on 4 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of a Mercedes C-Class
How to Remove the Rear Door Panel of a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. can start, open the rear door of your Mercedes C-Class. Begin by unscrewing and removing all the screws that secure the rear door panel to the door itself... …
How to Remove the Rear Door Panel of a Mercedes C-Class?
How to Remove the Rear Door Panel of a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. you begin, open the rear door of your Mercedes C-Class. Start by unscrewing and removing all the screws securing the rear door panel. Once you have unscrewed.. …
How to Remove the Door Panel of a Mercedes C-Class?
How to Remove the Door Panel of a Mercedes C-Class?
Mercedes Classe C (2014-2021 / W205) .. To remove the door panel of a Mercedes C-Class, loosen the screws located just below the armrest, where the window switch is found. Once the screws.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos