Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : How to replace the gear knob on Mercedes Sprinter

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Gear Shift Knob
Operation: How to replace the gear knob on Mercedes Sprinter

How to replace the gear knob on Mercedes Vito? Let's see in this video how to perform the disassembly: we disconnect the frame of the leather cap with a plastic lever, then, we unhook the plastic locking knob and remove the same from the shift rod. To carry out the assembly: take the new knob and insert it into the rod, tighten it with the appropriate plastic. After assembling the knob: insert the new cap and block it on the central tunnel. Finally, we test the correct functioning of the knob with the movement of the rod on the central tunnel.


Posted on 30 October 2023 by ScegliAuto



How do I remove the Mercedes Sprinter gearshift gaiter?
Mercedes Sprinter (2006-2018 / MK 2, W906) To be able to replace the Mercedes Sprinter gearshift gaiter, the old gaiter must first be removed. To do this, you have to pull the sleeve upwards,
Where is the fuse box located and how can I reach it in a Mercedes Sprinter?
Mercedes Sprinter (1995-2006 / W901, MK 1) Good morning and welcome to Scegliauto.com! In this guide, we will discover where the fuse box of our Mercedes Sprinter is located. Let's start by ge
Where is the OBD port located on the 2013 Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) In this new mini guide of ours, we will discover where the OBD port of your 2013 Mercedes Sprinter is located. First of all, make sure that the vehic

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos