Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : How do I remove the Mercedes Sprinter gearshift gaiter?

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Gearbox
Operation: How do I remove the Mercedes Sprinter gearshift gaiter?

To be able to replace the Mercedes Sprinter gearshift gaiter, the old gaiter must first be removed. To do this, you have to pull the sleeve upwards, after having disengaged it from its fixing clips. Subsequently, it will be necessary to rotate the thread located in the terminal part of the lever, immediately below the gear knob. When the thread has been rotated, it will be possible to remove the cap and its knob. Once the old cap and its knob have been removed, it will be possible to go and install the new cap with its knob.


Posted on 26 February 2024 by ScegliAuto



Where is the fuse box located and how can I reach it in a Mercedes Sprinter?
Mercedes Sprinter (1995-2006 / W901, MK 1) Good morning and welcome to Scegliauto.com! In this guide, we will discover where the fuse box of our Mercedes Sprinter is located. Let's start by ge
Where is the OBD port located on the 2013 Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) In this new mini guide of ours, we will discover where the OBD port of your 2013 Mercedes Sprinter is located. First of all, make sure that the vehic
Where is the fuse box on the Mercedes Sprinter 3
Mercedes Sprinter (2018-2024 / Br910, MK 3, Br907) In this new mini guide dedicated to your new Mercedes Sprinter third series (year 2018-2022) we will find out together where the fuse box is located,

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos