Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle the Gear Knob of the Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Shift knob

See other generations:
Video tutorial

In this guide, you will learn how to dismantle the gear knob of your Mercedes Sprinter by yourself. First, enter the vehicle and ensure it is turned off, then focus on the gear lever and proceed to remove the protective cover.

Once done, take a flat screwdriver and insert the tip into the bottom of the knob. Push upwards firmly until the knob is removed, and the procedure is successfully completed.

If necessary, you can fit a new gear knob.


Posted on 2 October 2026 by ScegliAuto


Related tutorials

Mercedes Sprinter (2006-2018 / MK 2, W906) Using any vehicle over the years, specifically the Mercedes Sprinter in this case, leads to wear on various materials, including the gear lever knob.…
Mercedes Sprinter (2006-2018 / MK 2, W906) To replace the gear gaiter of the Mercedes Sprinter, first remove the old gaiter. Pull the sleeve upwards after disengaging it from its retaining cli…
Mercedes Sprinter (2006-2018 / MK 2, W906) With regular use, the gear knob on the Mercedes Sprinter may show signs of wear that necessitate its replacement. To carry out the replacement, sit i…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos