|
Do it yourself
| |||
| ||||
Configuration and commands on the Mercedes display
Model: Mercedes EQB
X243
- Years 2022-2026
In this video, we see the configuration of the controls on the dashboard of Mercedes vehicles: in the center of the field of vision, the most important information is displayed, such as speed, outside temperature, and time. The rest of the display can be personalized by the user and can show various information, such as on the assistance system, navigation, or audio source, which can be viewed with the "touch control" button on the left side of the steering wheel: some content can be displayed in full screen. In addition to the touch control - which can be operated in four directions - on the left side there are the main menu button and the return button. On the right side, there are buttons for controlling the multimedia system, phone, and audio, as well as voice commands. Of course, the system can also be used through the multimedia screen and simplified functions that allow direct access, which can also be done through the touchpad on the central console, while driving, allowing quick access to the currently active function.
Posted on 10 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Mercedes EQB
(2022-2026 /
X243)
Removing the door panel of the Mercedes EQB 300 seems like a simple task: you will only need a T30 Torx wrench. There are only two screws to remove. …
Mercedes EQB
(2022-2026 /
X243)
To reset the service message on a Mercedes EQB, sit in the car and make sure it is turned off. Press the Start button without starting the engine to …
Mercedes EQB
(2022-2026 /
X243)
In fact, these features apply to the entire Mercedes range and not just the EQB: if the temperature inside the cabin is too high or too low, there is…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.062
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |