Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the service in a Mercedes EQB?

Model: Mercedes EQB X243 - Years 2022-2026
Part: Service warning light

To reset the service message on a Mercedes EQB, sit in the car and make sure it is turned off. Press the Start button without starting the engine to turn on the dashboard. Use the buttons on the steering wheel, usually those on the left, to navigate to the Mileage screen. Now press and hold the OK and Phone buttons (or the Home button depending on the version) for a few seconds until the hidden menu appears. From there, go to Assyst Plus, select Full Service or Reset Maintenance Interval, confirm and wait for the process to finish. When you are done, turn off and restart the car to verify that the message has disappeared. If you do not feel comfortable doing it yourself, contact an expert.

Posted on 8 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel on a Mercedes EQB 300
How to Remove the Rear Door Panel on a Mercedes EQB 300
Mercedes EQB (2022-2026 / X243) Removing the door panel of the Mercedes EQB 300 seems like a simple task: you will only need a T30 Torx wrench. There are only two screws to remove. …
Tips for using the air conditioning in the Mercedes EQB.
Tips for using the air conditioning in the Mercedes EQB.
Mercedes EQB (2022-2026 / X243) In fact, these features apply to the entire Mercedes range and not just the EQB: if the temperature inside the cabin is too high or too low, there is…
Configuration and commands on the Mercedes display
Configuration and commands on the Mercedes display
Mercedes EQB (2022-2026 / X243) In this video, we see the configuration of the controls on the dashboard of Mercedes vehicles: in the center of the field of vision, the most importa…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos