Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on a Mercedes EQB 300

Model: Mercedes EQB X243 - Years 2022-2026
Part: Door trim panel

Removing the door panel of the Mercedes EQB 300 seems like a simple task: you will only need a T30 Torx wrench. There are only two screws to remove. The first is located in the armrest area, in a visible or slightly recessed position; the second is found in the latch handle (the area you grip to close the door). You will need to look inside this area to find it. Use the wrench to remove both screws and free the panel, which is now held only by snap clips. Start at the bottom edge with a plastic tool to pop them loose. Once everything is detached, remember that there are still electrical connectors for the speakers, window controls, ambient lighting, and the emergency handle.

Posted on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the service in a Mercedes EQB?
How do you reset the service in a Mercedes EQB?
Mercedes EQB (2022-2026 / X243) To reset the service message on a Mercedes EQB, sit in the car and make sure it is turned off. Press the Start button without starting the engine to …
Tips for using the air conditioning in the Mercedes EQB.
Tips for using the air conditioning in the Mercedes EQB.
Mercedes EQB (2022-2026 / X243) In fact, these features apply to the entire Mercedes range and not just the EQB: if the temperature inside the cabin is too high or too low, there is…
Configuration and commands on the Mercedes display
Configuration and commands on the Mercedes display
Mercedes EQB (2022-2026 / X243) In this video, we see the configuration of the controls on the dashboard of Mercedes vehicles: in the center of the field of vision, the most importa…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos