Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Door Speakers in a Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Speaker

See other generations:
Video tutorial

To replace the door speakers in a Mercedes A-Class, disconnect the battery to avoid electrical issues. Start by removing the door panel: unscrew the hidden screws in the handle and along the edges, then carefully pry it off to release the clips holding it in place.

Once the panel is removed, locate the speaker attached to the door frame. Disconnect the electrical connector from the speaker and unscrew the screws that hold it in position.

Then remove the old speaker and place the new one in the same housing. Secure it with the screws and reconnect the electrical connector.

Before reassembling the door panel, turn on the car radio to check that the speaker works properly. Finally, reattach the panel, ensuring all clips are securely fastened.


Posted on 19 April 2026 by ScegliAuto


Related tutorials

How to Replace the Speakers in a Mercedes A-Class?
How to Replace the Speakers in a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. To replace the speakers in a Mercedes A-Class, use a tool to pry off the chrome trim located under the armrest on the door panel. This will allow.. …
How to Replace the Speakers in a Mercedes A-Class?
How to Replace the Speakers in a Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. To replace the speakers in a Mercedes A-Class, loosen the screws that secure the door panel: these screws are located at the handle and along.. …
Disassembling the Ignition Key of a Mercedes A-Class
Disassembling the Ignition Key of a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. Change the battery in the key of a Mercedes A-Class. First, open the key fob and remove the emergency key from inside. Pry between the two halves until.. …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos