Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Speaker on the Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Speaker

In this video tutorial, you will learn the main steps to remove and replace the speaker in the Mercedes A-Class. To access the front speaker, first, remove the door panel by unscrewing the fastening screws; then unscrew the speaker screws located on the sides and disconnect the power connector found on the back, as shown in the video. Now replace and install the new speaker, securing it properly and connecting the electrical wiring, then test its operation.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Mercedes A-Class
Guide to Replacing the Timing Belt on the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. and replace the timing belt on the Mercedes A-Class with a Renault engine. First, open the hood of your car and begin to remove the timing belt cover;.. …
Guide to Replacing the Air Vents of the Mercedes A-Class
Guide to Replacing the Air Vents of the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. and replace the air vents of the Mercedes A-Class. First, get inside the vehicle and use the appropriate removal tool to pull out the air vent fixed.. …
Guide to Replacing the Starter Motor on the Mercedes A-Class
Guide to Replacing the Starter Motor on the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. and replace the starter motor on the Mercedes A-Class. First, open the hood of the vehicle and disconnect both battery terminals; then, remove the screws.. …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos