Do it yourself
Frequently asked questions about cars and motorcycles

How to repair the panoramic roof of the Mercedes CLA

Model: Mercedes CLA C117, X117 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

Below we will see the instructions that will allow us to carry out the repair of the panoramic roof of the Mercedes CLA, in simple steps. First, we open the panoramic roof and start loosening the screws of the roof guides, first on one side and then on the other; the malfunction due to opening is mainly caused by incorrect alignment.

We then adjust the pins and guides of the panoramic roof, tightening everything; we then check the correct operation of the panoramic roof, both when opening and closing, following the video tutorial until the end!


Posted on 14 September 2025 by ScegliAuto


Related tutorials

Mercedes CLA (2013-2019 / C117, X117) Learn through this video tutorial how to replace the auxiliary battery in a Mercedes CLA. First, you need to know where it is located. The auxiliary …
Mercedes CLA (2019-2025 / X118, C118) To gain access to the OBD port of your Mercedes CLA 250 and connect a diagnostic tool, you need to carefully read the following guide and apply it st…
Mercedes CLA (2013-2019 / C117, X117) Inside the Mercedes CLA, all fuses are contained in the designated fuse box installed in the vehicle: this is located inside the cabin, immediately b…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos