Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin air filter of the Mercedes C-Class.

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Cabin air filter

See other generations:
Video tutorial

The following instructions will show us how to replace the cabin air filter of the Mercedes C-Class. First, we open the hood of the car and start by removing the plastic cover located at the top left of the engine compartment, accessing the pollen filter box; we then remove the cartridge found inside, as shown in the video.

At this point, we clean the inside of the box from any residual dirt, and then install the new cabin air filter (in the correct direction); finally, we secure the cover.


Posted on 2 October 2025 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on the Mercedes C-Class
Replacing the Cabin Air Filter on the Mercedes C-Class
Mercedes Classe C (1993-2000 / W202) .. replace the cabin air filter on the Mercedes C-Class. First, get in the vehicle on the passenger side and start by removing the rectangular plastic.. …
How to Remove the Cabin Air Filter from a Mercedes C-Class
How to Remove the Cabin Air Filter from a Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. to remove the cabin air filter from a Mercedes C-Class. Pull down on the lower fabric cover of the cabin with your hands, and use a screwdriver to remove.. …
How to Replace the Cabin Air Filter in a Mercedes-Benz C-Class W205
How to Replace the Cabin Air Filter in a Mercedes-Benz C-Class W205
Mercedes Classe C (2014-2021 / W205) If you want to change the cabin air filter in your Mercedes-Benz C-Class W205 (2014-2021), follow the steps below. First, completely turn off your Me…

Other guides you may be interested in

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos