Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulb of the Mercedes SLK 350

Model: Mercedes Slk MK 2, R171 - Years 2004-2011
Part: Fog lights

In the following guide, we will describe the steps you need to follow in order to safely replace the fog light bulb of your Mercedes SLK 350. First of all, make sure you have turned off the car and properly engaged the parking brake, then go outside and reach the wheel well on the same side as the bulb to be replaced. Next, unscrew the various screws and remove the wheel well. Once you have done this, remove the fog light bulb holder and proceed with the replacement of the bulb. Finally, reassemble everything and you are done.

Posted on 5 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fog Light Bulb on a Mercedes SLK
How to Replace the Fog Light Bulb on a Mercedes SLK
Mercedes Slk (2004-2011 / MK 2, R171) Is the fog light bulb on your Mercedes SLK damaged? Here’s how to replace it. Remove the plastic cover at the bottom of the bumper with a suitable sc…
How to Remove the Power Steering Pump from a Mercedes SLK 350 Petrol
How to Remove the Power Steering Pump from a Mercedes SLK 350 Petrol
Mercedes Slk (2004-2011 / MK 2, R171) In today's video, you will see the main instructions to dismantle and replace the power steering pump of a Mercedes SLK 350 petrol. First, open the b…
How to replace the rear headlight bulb of the Mercedes SLK
How to replace the rear headlight bulb of the Mercedes SLK
Mercedes Slk (1997-2004 / R170, MK 1) The instructions in this guide will show us how to disassemble and replace the rear headlight or stop light bulb of the Mercedes SLK. First, we open …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos