Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin fan of the Mercedes GLB

Model: Mercedes Glb MK 1 - Years 2019-2026
Part: Blower motor

Today we will see the instructions that will allow us to disassemble and replace the cabin fan of the Mercedes GLB. First, we open the front door on the passenger side and start removing the plastic cover located under the glove compartment; inside we will find the cabin fan, which we will remove by unscrewing the fixing screws and disconnecting the power supply wiring, as shown in the video. At this point, we carry out the repair or replacement of the cabin fan, reassembling it correctly and testing its operation at various speeds.

Posted on 26 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter of the Mercedes GLB
How to Replace the Cabin Filter of the Mercedes GLB
Mercedes Glb (2019-2026 / MK 1) To replace the cabin air filter in your Mercedes GLB, follow a few simple steps. This guide will outline the steps to help you complete the replaceme…
How to Reset the "Service" Light on a Mercedes GLB?
How to Reset the "Service" Light on a Mercedes GLB?
Mercedes Glb (2019-2026 / MK 1) Today, you will focus on resetting the maintenance light on your Mercedes GLB. First, start the car and check that the "Service" indicator is visible…
What is the Fuse Diagram for the Mercedes GLB?
What is the Fuse Diagram for the Mercedes GLB?
Mercedes Glb (2019-2026 / MK 1) In this video, we can see where the fuse boxes are located in the Mercedes GLB and their respective diagrams, useful in case you need to check the fu…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos