Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in a Mercedes GLC

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022
Part: Battery

To replace the battery in a Mercedes GLC, turn off the engine and remove the electronic key. Open the hood and locate the battery, usually positioned on the front right or left side of the engine compartment, protected by a plastic cover. Remove the cover and disconnect the negative (-) terminal first, then the positive (+) terminal with an appropriate wrench. Unscrew the mounting bracket at the base of the battery and carefully remove it. Insert the new battery into the same housing, secure it with the bracket, and connect the positive (+) terminal first, then the negative (-). Reattach the cover and check the proper functioning of the vehicle and electronic systems.

Posted on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Glc (2015-2022 / C253, X253, MK 1) To replace the battery of the Mercedes GLC remote control, you need to pry open the back of the device so that you can detach the corresponding cover…
Mercedes Glc (2015-2022 / C253, X253, MK 1) In this brief guide, you will find the main instructions on how to register the battery after replacing it in a Mercedes GLC. To program the battery,…
Mercedes Glc (2015-2022 / C253, X253, MK 1) The battery of our Mercedes GLC is located in the engine compartment. To reach it, we will have to open the hood. Then, we will have to remove the en…

Other guides you may be interested in

    Frequently Asked Questions

    • Glc 2015-2022 - Where is the battery located in the Mercedes GLC? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos