Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Battery of a Mercedes GLC

Model: Mercedes Glc C253, X253, MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

In this brief guide, you will find the main instructions on how to register the battery after replacing it in a Mercedes GLC. To program the battery, you need to use a special tool connected to the vehicle's OBD diagnostic port; select the make, model, and engine type of the vehicle.

At this point, navigate to the battery section, confirming and executing the registration; the battery replacement will then be saved in the vehicle's history, following the video tutorial to the end!


Posted on 5 August 2026 by ScegliAuto


Related tutorials

Where to Find and How to Access the Battery of a Mercedes GLC?
Where to Find and How to Access the Battery of a Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) The battery of your Mercedes GLC is located in the engine compartment. To access it, open the hood. Next, remove the engine cover. This will allow yo…
How to replace the battery of the Mercedes GLC
How to replace the battery of the Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) The battery of the Mercedes GLC is located inside the front hood, to the right of the engine. We open the front hood and then remove the battery cove…
Replacing the Auxiliary Battery on a Mercedes GLC 250D
Replacing the Auxiliary Battery on a Mercedes GLC 250D
Mercedes Glc (2015-2022 / C253, X253, MK 1) Let's see how to replace the auxiliary battery on a Mercedes GLC. Open the car's door and lift the floor covering to find the auxiliary battery. Once…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos