Do it yourself
Frequently asked questions about cars and motorcycles

Disassembling the Centre Console or Tunnel of a Mercedes Class B

Model: Mercedes Classe B W245, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Center console tunnel

See other generations:
Video tutorial

This guide provides instructions for disassembling and replacing the centre console or tunnel of a Mercedes Class B. First, get in the vehicle and start removing the cover located at the base of the gear lever; remove the trim of the handbrake lever and the armrest, as shown in the video.

At this point, remove the cup holder and unscrew the lower screws of the centre tunnel; disconnect the 12V socket connector located at the rear, removing the centre console.

Carry out the repair or replacement, following the video tutorial to the end!


Posted on 27 March 2026 by ScegliAuto


Related tutorials

Mercedes Classe B (2005-2011 / W245, MK 1) Watch this video to learn how to remove the centre tunnel on a Mercedes B-Class. First, grip the knob with both hands and rotate it left and right un…
Mercedes Classe B (2005-2011 / W245, MK 1) Today we will discover the instructions that will allow us to disassemble the central armrest of the Mercedes Class B, in simple steps. First, we get…
Mercedes Classe B (2005-2011 / W245, MK 1) To replace the airbag control unit of the Mercedes B-Class, use a tool to pry off all the plastic covers located on the centre console of the car. On…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos