Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Tunnel on a Mercedes B-Class

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Center console tunnel

See other generations:
Video tutorial

Watch this video to learn how to remove the centre tunnel on a Mercedes B-Class. First, grip the knob with both hands and rotate it left and right until you can remove it from the gear lever.

Use a plastic lever to disconnect the trim on the centre tunnel, and detach the gaiter from the gear lever. Once the front central piece is removed, use the lever to take out the rear centre tunnel piece (levering between the plastic to detach and the centre tunnel fixed to the chassis).

Finally, replace everything with the new piece. Reassemble everything in reverse order.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Disassembling the Centre Console or Tunnel of a Mercedes Class B
Disassembling the Centre Console or Tunnel of a Mercedes Class B
Mercedes Classe B (2005-2011 / MK 1, W245) .. the centre console or tunnel of a Mercedes Class B. First, get in the vehicle and start removing the cover located at the base of the gear lever;.. …
How to Replace the Airbag Control Unit of the Mercedes B-Class?
How to Replace the Airbag Control Unit of the Mercedes B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) .. the airbag control unit of the Mercedes B-Class, use a tool to pry off all the plastic covers located on the centre console of the car. Once these.. …
Replacing the Serpentine Belt on Mercedes B-Class W245
Replacing the Serpentine Belt on Mercedes B-Class W245
Mercedes Classe B (2005-2011 / MK 1, W245) .. and replace the serpentine belt on a Mercedes B-Class W245 in simple steps, which also applies to other models from the manufacturer, such as the A-Class... …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos