Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Wiper Blades on a Mercedes GLA

Model: Mercedes Gla MK 2, H247 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Windshield wipers

See other generations:
Video tutorial

To replace the wiper blades on a Mercedes-Benz GLA 250, manually lift the wiper arm until it is in a vertical position relative to the windscreen. Identify the attachment point between the arm and the blade.

Press the release tab of the blade and slide it along the arm until it is removed. Take the new blade and insert it into the attachment following the same orientation, pushing until you hear a click.

Slowly lower the arm back onto the windscreen without letting it drop. Repeat the process on the other side.

Finally, check the correct attachment and operation by activating the wipers.


Posted on 25 April 2026 by ScegliAuto


Related tutorials

How to replace the windshield wiper blades of the Mercedes GLA
How to replace the windshield wiper blades of the Mercedes GLA
Mercedes Gla (2013-2019 / W156, MK 1) Today we will explain how to replace the front and rear windshield wiper blades on a Mercedes GLA model 156. The windshield wiper blades can be purch…
How to Replace the Wipers on a Mercedes GLA?
How to Replace the Wipers on a Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) For wiper replacement, refer to this video guide, which shows the entire procedure, which is quite simple and DIY-friendly. Note that this tutorial i…
Where are the Fuses on the Mercedes GLA?
Where are the Fuses on the Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) The fuse boxes installed on the Mercedes GLA serve to contain the fuses that control the operation of the devices installed in the vehicle: in this c…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos