Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Opening and Closing of the Sunroof in the Mercedes A-Class W176?

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Convertible top

See other generations:
Video tutorial

The restored sunroof shown in the video belongs to the vehicle mentioned, the Mercedes A-Class W176. Over time, it may lose its programmed position for opening and closing, stopping earlier or later than expected, which can be a significant inconvenience, so it needs to be reprogrammed.

How to do it? Turn on the ignition, press the open button, reach the limit switch, and continue holding it for a few seconds.

Then, apply the same procedure for closing. After that, turn off the ignition, turn it back on, and test it.


Posted on 29 April 2026 by ScegliAuto


Related tutorials

Where is the fuse box of the Mercedes A-Class W176 located?
Where is the fuse box of the Mercedes A-Class W176 located?
Mercedes Classe A (2012-2018 / W176) .. To locate the fuse box of your Mercedes A-Class W176, you only need a few seconds. All you have to do is read the instructions described in the.. …
Programming the Remote for the Mercedes A-Class W176
Programming the Remote for the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. the remote and key for the Mercedes A-Class W176, third generation; this procedure is applicable to most vehicles. To synchronize or program.. …
How to Reset the Tire Pressure Light on Mercedes A-Class W176
How to Reset the Tire Pressure Light on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) In this brief tutorial, learn how to reset the tire pressure light on a Mercedes A-Class model W176, produced from 2012 to 2018. First, turn on the v…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos