Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Trim on the Doors of the Mercedes Vito

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

Today, I will explain how to install the trim on the side door of the Mercedes Vito. Remove the previous trim using a flat-blade screwdriver. After removing the trim, you can decide whether to leave the previous clips on the door or insert new ones, depending on whether the old ones are damaged or not. Next, apply silicone to the trim and insert it into the gap, pressing the trim against the bodywork.

After completing this simple operation, it is important to wait a few hours before driving to prevent the trim from coming off due to external agents like rain.


Posted on 12 May 2026 by ScegliAuto


Related tutorials

Replacing the External Handle on a Mercedes Vito
Replacing the External Handle on a Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) Removing the external handle from a door of the Mercedes Vito is a quick and simple task. After opening the relevant door, remove the round black cov…
How to Install the External Door Handle on the Mercedes Vito
How to Install the External Door Handle on the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) The following steps will show you how to install the front door handle on the Mercedes Vito. First, open the front door and start by removing the con…
How to Install the Car Radio in a 2022 Mercedes Vito W 447
How to Install the Car Radio in a 2022 Mercedes Vito W 447
Mercedes Vito (2014-2024 / MK 3, W447) Installing the car radio in the 2022 Mercedes Vito W 447 is a straightforward task. This brief video tutorial will guide you through all the steps fo…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos