Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Hood of the Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018

Today, you will learn how to open the hood of the Mercedes A-Class. To open the hood, pull the release lever located at the front near the driver’s pedals. The hood will lift slightly; only after moving the internal lever can you fully open the hood. If the vehicle does not respond, check the fuse that controls the vehicle's central unit or inspect the hood release connector. After opening the hood and performing the necessary maintenance tasks, let the hood fall back down to close it.

Posted on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open and close the hood of the Mercedes A-Class
How to open and close the hood of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. and closing the front hood of a Mercedes A-Class vehicle, model w169, is a very simple and quick operation that can be done independently thanks.. …
How to open the engine hood of the Mercedes A-Class.
How to open the engine hood of the Mercedes A-Class.
Mercedes Classe A (2018-2026 / W177) .. The instructions in this guide will show us how to open the hood of the Mercedes A-Class, as well as the CLA. First, let's get inside the vehicle.. …
How to Open the Hood of a Mercedes A-Class
How to Open the Hood of a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. how to maintain your car's engine? Let's see how to open the hood of the Mercedes A-Class. Pull the lever located at the bottom left of the steering.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos