Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Convert a Mercedes Vito into a Camper

Model: Mercedes Vito W638, MK 1 - Years 1995-2003
Part: Checks and maintenance

The Mercedes Vito is undoubtedly one of the vehicles best suited for conversion into a camper, given its relatively compact size and practicality in tight spaces. The rear compartment, as seen in the video, is completely dismantled and recreated; you will notice how it starts with the lining, using sound-absorbing panels and thermal insulation on all walls and the roof, followed by the installation of the flooring and subsequently the plumbing, electrical system, and all necessary furnishings, such as a table, bed, etc.

Posted on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Battery from a Mercedes Vito
How to Remove the Battery from a Mercedes Vito
Mercedes Vito (2003-2013 / W639, MK 2) Before starting, open the driver’s door of your Mercedes Vito. Begin by prising off and removing the side cover of the battery. Next, unscrew and loo…
Where is the fuse box of the Mercedes Vito W638 located?
Where is the fuse box of the Mercedes Vito W638 located?
Mercedes Vito (1995-2003 / W638, MK 1) If you own a Mercedes Vito W638 and need access to the fuses but don't know where the box containing them is located, all you have to do is follow th…
Where is the OBD2 Port on the Mercedes Vito W447?
Where is the OBD2 Port on the Mercedes Vito W447?
Mercedes Vito (2014-2024 / MK 3, W447) If you are curious about the location of the OBD2 port on your Mercedes Vito W447, simply read the following guide carefully and follow all the descr…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos