Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Mercedes-Benz B-Class

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Battery

Today, see the instructions that will allow you to remove and replace the battery on a Mercedes-Benz B-Class in simple steps. First, open the front passenger door and start by removing the mat and the floor cover, thus accessing the battery compartment; then disconnect both battery terminals (positive and negative), unscrewing the bracket screw to remove it from its housing, as shown in the video. At this point, install the new battery, of the correct type and with the same amperage; then check the engine starts!

Posted on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Battery Replacement on Mercedes A-Class and B-Class
Battery Replacement on Mercedes A-Class and B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. On Mercedes A-Class and B-Class models produced until 2012, the battery is located under the driver's footwell. Accessing.. …
How to Replace the Battery in a Mercedes-Benz B-Class?
How to Replace the Battery in a Mercedes-Benz B-Class?
Mercedes Classe B (2005-2011 / W245, MK 1) .. to remove and replace the battery in a Mercedes-Benz B-Class, following the instructions below. First, get into the vehicle on the driver's side and.. …
How to replace the battery of the Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. and replace the battery of the Mercedes B-Class. First, we open the front door on the passenger side and begin to remove the mat and the cover.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the battery of the Mercedes B-Class W245 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos