Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mercedes-Benz B-Class?

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Battery

See other generations:
Video tutorial

Today's guide will show you how to remove and replace the battery in a Mercedes-Benz B-Class, following the instructions below. First, get into the vehicle on the driver's side and start by removing the mat and cover to access the battery compartment, as shown in the video.

At this point, disconnect both battery terminals (positive and negative), remove the old battery and replace it with a new one; install the correct type of battery with the same amperage, reconnect it electrically, and refit the upper cover.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

Battery Replacement on Mercedes A-Class and B-Class
Battery Replacement on Mercedes A-Class and B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. On Mercedes A-Class and B-Class models produced until 2012, the battery is located under the driver's footwell. Accessing.. …
How to Replace the Steering Wheel Controls of a Mercedes-Benz B-Class
How to Replace the Steering Wheel Controls of a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. the steering wheel controls of a Mercedes-Benz B-Class is a very simple operation. Start by disconnecting the battery terminals, first the negative.. …
How to Replace the Battery in a Mercedes B-Class?
How to Replace the Battery in a Mercedes B-Class?
Mercedes Classe B (2011-2019 / MK 2, W246) .. To replace the battery in a Mercedes B-Class, open the bonnet and locate the plastic cover protecting the unit, positioned immediately under.. …

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the battery of the Mercedes B-Class W245 located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos