Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Steering Angle Sensor on the Mercedes GLC

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022

This guide provides instructions to remove and replace the steering angle sensor on the Mercedes GLC. First, get inside the cabin and start by removing the steering wheel and its airbag. Disconnect the electrical connector and remove the central screw. Next, disconnect the wiring for the steering angle sensor by unscrewing the mounting screws to take it out, as shown in the video. At this point, perform the repair or replacement of the steering angle sensor, calibrate it, and reassemble the steering wheel and its airbag.

Posted on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Glc (2015-2022 / C253, X253, MK 1) Start by removing the clips that secure the plastic door sills on your Mercedes GLC, then remove the corresponding lower bolts. Once done, open the d…
Mercedes Glc (2022-2026 / C254, X254, MK 2) To complete the procedure that allows you to independently replace the windshield wipers of your second edition Mercedes GLC, simply follow these ste…
Mercedes Glc (2015-2022 / C253, X253, MK 1) The battery of our Mercedes GLC is located in the engine compartment. To reach it, we will have to open the hood. Then, we will have to remove the en…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos