Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove a Wheel from a Mercedes GLC?

Model: Mercedes Glc X254, C254, MK 2 - Years: 2022, 2023, 2024, 2025, 2026
Part: Wheel

See other generations:
Video tutorial

To remove a wheel from a Mercedes GLC, start by parking the vehicle on a flat, stable surface and engaging the parking brake. Loosen the wheel nuts slightly with a cross wrench, but do not remove them completely.

Position a jack under the lift point indicated near the wheel you want to remove and raise the vehicle until the wheel is off the ground. Ensure the vehicle is stable on the jack and, if possible, use jack stands for added safety.

Once the vehicle is raised, completely remove the wheel nuts and set them aside. Take the wheel off the hub by gripping it firmly with both hands and pulling towards you. If the wheel is stuck, you may need to tap it lightly with the palm of your hand to loosen it. After removing the wheel, you can proceed with the necessary tasks.

To reinstall the wheel, position it correctly on the hub studs, hand-tighten the nuts, lower the vehicle, and then tighten the nuts with the cross wrench in a crisscross pattern to ensure even tension distribution.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

Mercedes Glc (2015-2022 / C253, X253, MK 1) In this video we can see how to remove the Mercedes emblem from the front grille of a Mercedes GLC: it is not as simple as it seems, and it is advisa…
Mercedes Glc (2022-2026 / X254, C254, MK 2) To complete the procedure that allows you to independently replace the windshield wipers of your second edition Mercedes GLC, simply follow these ste…
Mercedes Glc (2015-2022 / C253, X253, MK 1) The battery of your Mercedes GLC is located in the engine compartment. To access it, open the hood. Next, remove the engine cover. This will allow yo…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos