Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Mercedes CLK

Model: Mercedes Clk A209, C209, W209 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

See other generations:
Video tutorial

How to remove and replace the radio in a Mercedes CLK? Let's see how to do it. Remove the ashtray using a plastic lever (located under the radio), detaching it from the central console. Remove the button panel above the radio (where the hazard light button is located).

Unscrew the screws on either side of the radio and pull it out from the console (disconnect the power and antenna cables). Install the new radio with the electrical connectors, then screw in the securing screws.

Refit the button panel at the top and the ashtray at the bottom. Turn on the radio and check its operation.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Mercedes CLK
How to Remove the Radio from a Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) How to remove the radio (navigation system) from a Mercedes CLK? Let's see how to proceed carefully. Using a plastic (or metal) lever, remove (by lev…
How to Remove the Radio from a Mercedes CLK
How to Remove the Radio from a Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) How do you remove the radio from your Mercedes CLK? Watch this video carefully to see how to proceed with the disassembly. Using a plastic or metal s…
How to Remove the Radio from a Mercedes CLK
How to Remove the Radio from a Mercedes CLK
Mercedes Clk (1997-2003 / A208, C208, W208) Before you can begin, sit in the driver's seat of your Mercedes CLK. Start by prising and sliding back the gear surround using a thin but sturdy tool…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos