Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Radio/Navigation System from Mercedes GLA

Model: Mercedes Gla W156, MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

In this tutorial video, learn how to remove the controls of the radio in a Mercedes GLA. Get inside the vehicle and equip yourself with a flat screwdriver and a plastic lever: start by prying on the air vents and remove them; now pry on the side trim of the radio controls and pull it forward, disconnecting the electrical connectors found at the back (be very gentle to avoid breaking them); also be careful with the plastic supports at the back.

For reassembly, apply the reverse procedure.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Remove the Standard Radio from the Mercedes GLA
How to Remove the Standard Radio from the Mercedes GLA
Mercedes Gla (2013-2019 / W156, MK 1) This brief guide provides instructions on how to remove and replace the standard radio from the Mercedes GLA. First, enter the cabin and start by rem…
How to Remove the Front Brake Pads on a Mercedes GLA
How to Remove the Front Brake Pads on a Mercedes GLA
Mercedes Gla (2013-2019 / W156, MK 1) Before you can start, lift the front of your Mercedes GLA. Begin by removing the left front wheel by unscrewing the fixing bolts. Next, unscrew and r…
Replacing the Fuel Pump on the Mercedes GLA
Replacing the Fuel Pump on the Mercedes GLA
Mercedes Gla (2013-2019 / W156, MK 1) Today, follow the procedure for dismantling and replacing the fuel pump on the Mercedes GLA as outlined below. First, raise the vehicle and begin rem…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos