Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump on the Mercedes GLA

Model: Mercedes Gla MK 1, W156 - Years 2013-2019
Part: Fuel pump

Today, follow the procedure for dismantling and replacing the fuel pump on the Mercedes GLA as outlined below. First, raise the vehicle and begin removing the fuel tank by unscrewing all the fastening screws of the brackets and disconnecting the fuel lines; this will allow access to the fuel pump, as shown in the video. Next, unscrew the pump ring to remove it from the tank, replacing it with a new original one; refit the pump and finally the fuel tank!

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel pump of the Mercedes GLA 250
Replacement of the fuel pump of the Mercedes GLA 250
Mercedes Gla (2013-2019 / MK 1, W156) In this short guide, we will see the main instructions on how to disassemble and replace the fuel pump of the Mercedes GLA 250. In order to access th…
Where are the fuses located in the Mercedes GLA?
Where are the fuses located in the Mercedes GLA?
Mercedes Gla (2013-2019 / MK 1, W156) The fuses in the Mercedes GLA are contained within dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse boxes. The first …
Where are the Fuses in the Mercedes GLA?
Where are the Fuses in the Mercedes GLA?
Mercedes Gla (2013-2019 / MK 1, W156) Each fuse in the Mercedes GLA is contained within one of the dedicated fuse boxes present in the vehicle: in this type of vehicle, you can find two b…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos