Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Seat on a Mercedes E

Model: Mercedes Classe E W124 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Seat

See other generations:
This video is currently unavailable

Is the seat on your Mercedes in need of repair or replacement? Remove the seat and replace it with a new one of the same type. Move the seat back using the lever located underneath, raise the seat cushion, then, using a socket wrench, remove the securing bolts on the front track.

Slide the seat forward and remove the securing pins from the rear of the track. Take the seat out of the car: if there are power connectors for the seat, disconnect them.

Install the new seat onto the sliding tracks and tighten the securing bolts.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Removal and Replacement of the Rear Seat
Removal and Replacement of the Rear Seat
Mercedes Classe E (2002-2009 / W211) First, locate the two holes at the bottom of the seat where the clips hold it in place. Press with your fingers, disengage, and lift the seat. At thi…
Removing the Front Seats of the Mercedes E
Removing the Front Seats of the Mercedes E
Mercedes Classe E (1976-1985 / W123) How to remove the front seat of the Mercedes E? Enter the front of the vehicle and start identifying where to disassemble the components. Move the se…
How to Remove the Headrests from the Mercedes E-Class
How to Remove the Headrests from the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) Today, let's go over the main instructions for removing the front headrest from the Mercedes E-Class. In this case, the disassembly is done with the …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos