Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Light Bulb

Model: Mercedes CLS C219, MK 1 - Years 2004-2010
Part: Tail light bulb

Replacing the bulb is a task that does not require extensive skills, although it seems to have become a bit more challenging in newer cars. To replace the rear light bulb, open the boot and unscrew the two screws, then peel back the upholstery and reach in to unscrew the screw. Once done, you can detach the rear light from the bodywork, being careful as it is not necessary to disconnect all the wires, just the bulb holder by applying pressure on the two clips. At this point, replacing the bulb will be simple and straightforward.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Light Bulb on a Mercedes CLS
How to Replace the Front Light Bulb on a Mercedes CLS
Mercedes CLS (2004-2010 / C219, MK 1) To replace the front light bulb on a Mercedes CLS, open the bonnet to access the engine bay and locate the rear of the light where the bulb needs to …
How to Remove the Rear Light on a Mercedes CLS
Mercedes CLS (2004-2010 / C219, MK 1) Do you want to replace the damaged rear light? Here’s how to remove the headlamp from a Mercedes CLS. Open and lift the boot, detach the plastic cove…
How to Replace the Rear Light Bulb on a Mercedes CLS
How to Replace the Rear Light Bulb on a Mercedes CLS
Mercedes CLS (2004-2010 / C219, MK 1) To replace the rear light bulb on a Mercedes CLS, you need to detach the rivets securing the plastic covers around the boot area. Once these covers a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos