Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Put the Automatic Transmission of the Mercedes E-Class W211 in Neutral

Model: Mercedes Classe E W211 - Years 2002-2009

In this video tutorial, you will learn how to engage the neutral mode of the Mercedes Benz E-Class W211 by following these simple steps. First, get inside the vehicle and start by removing the shift boot, prying it off from the sides. Next, disconnect the small plastic pin located inside, which prevents the gear lever from being shifted into neutral, as shown in the video. This way, you can start the vehicle in neutral; this procedure is intended as an emergency maneuver to move the vehicle in case of malfunction.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset and Learn the Automatic Transmission of the Mercedes E-Class
How to Reset and Learn the Automatic Transmission of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Below are the main instructions on how to reset and subsequently learn the automatic transmission of the Mercedes E-Class. First, get inside the vehi…
How do you unlock the automatic transmission of the Mercedes E-Class?
How do you unlock the automatic transmission of the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) To unlock the automatic transmission of the Mercedes E-Class, it will be possible to use an object to pry off the surrounding panel around the gear s…
How to Reset the Automatic Transmission of the Mercedes E-Class?
How to Reset the Automatic Transmission of the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) To reset the automatic transmission of the Mercedes E-Class, turn on the ignition by rotating the key in the ignition switch. Once the dashboard ligh…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos