Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Update the Navigation System in the Mercedes-Benz C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

In today's video, you will see how to update the original navigation system in the Mercedes-Benz C-Class. This tutorial also applies to other models from the German manufacturer equipped with the same navigation system.

First, obtain a navigation disc with the updated maps. This system does not have a USB input.

After a few seconds, the vehicle will read the disc and ask if you want to proceed with the update. Confirm and wait for the update to finish.

Once done, you can turn off the navigation system and the vehicle. As you can see, this is a simple job.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Update the Navigation Software on the Mercedes C-Class?
How to Update the Navigation Software on the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. update the navigation software on the Mercedes C-Class, open the glove compartment on the passenger side and remove the navigation control module from.. …
How to Update the Garmin Map Pilot in the Mercedes-Benz C-Class W205
How to Update the Garmin Map Pilot in the Mercedes-Benz C-Class W205
Mercedes Classe C (2014-2021 / W205) .. the Garmin Map Pilot system in the Mercedes-Benz C-Class W205. First, get in the vehicle and turn on the ignition; then, download the update from.. …
How to reset the service light on the 2010 Mercedes C-Class
How to reset the service light on the 2010 Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. the service warning light on a 2010 Mercedes C-Class vehicle, we must turn on the instrument panel and after accessing the mileage menu by pressing.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos